8.3 Front door latches
Overview
BOM
| Material | Quantity | Notes |
|---|---|---|
| M3 6mm | 4 | |
| M3 10mm | 4 | |
| M3 nut | 8 | |
| 2x5mm magnet | ? |
STL’s
| File name | Amount to print |
|---|---|
| Latch Top Left | 1 |
| Latch Top Right | 1 |
| Latch Bottom Left | 1 |
| Latch Bottom Right | 1 |
| [Latch Mount] (not needed when done while assembling the frame) | 4 |
Step 1
Insert the 2x5mm magnet in the latches, they are press fit. If not tight use super glue to hold them in.
Step 2
Insert the M3 nuts in the latches
Step 3
Screw the latches to the door panels using the M3 buttonheads
Step 4
Untighten the set screws in the frame side latches and line them up with the latches, then to lock them tighten the M3 screw.